New Hampshire Insurance AppraiserIndependent claim appraisal (844) 537-1427

Free calculator

Roof Squares Calculator for Insurance Claims

Short measurements are a quiet reason roof claims come up light. Steep New England capes and colonials make the gap bigger. Check the math here.

Steep-Roof Squares Checker

Steep-roof squares checkerCheck the insurer’s measurements
Measurement method
Use a local contractor’s quote for a rough replacement figure.
Roof squares (before waste)0
Pitch multiplier1.000
Roof surface area0
Squares to order (with waste)0
Shingle bundles (3 per square)0
Rough replacement cost—

For planning only. Results depend on what you enter and your policy terms, and aren’t a quote, appraisal or legal advice. Nothing is stored.

The pitch multiplier

A pitched roof has more surface than the footprint under it. The multiplier is √(1 + (rise ÷ 12)²). A 9/12 roof — common on older capes — carries about 25% more surface than its footprint; a 12/12 roof about 41% more.

Comparing against the insurer’s estimate

  • Find total squares and the waste percentage in the roof section.
  • Differences above 5–10% are worth a closer look at the measurement report.
  • Look for steep and high-roof charges, plus starter, ridge, drip edge and ice & water shield lines.

Where a footprint falls short

Roofs with dormers, ells, attached barns or several pitches need plane-by-plane measuring. Use this as a sanity check alongside an aerial report or a tape measure.

About this tool

What is a square?

One hundred square feet of roof surface. Many New Hampshire single-family roofs fall somewhere between 18 and 35 squares.

Why does waste change by roof style?

Hips, valleys and dormers mean more cutting, so more material becomes scrap.

Try another calculator

Rather have someone check the math?

Send us your estimate and we’ll go through it line by line.