Depth × density = weight
Load in pounds per square foot is depth in feet multiplied by the snow’s density. Fresh powder can be light; settled and wet snow is far heavier, and ice is heavier still. Rain falling on an existing snowpack adds weight quickly.
| Material | Approximate density | Load per foot of depth |
|---|---|---|
| Fresh light snow | ≈7 lb/ft³ | ≈7 lb/ft² |
| Settled snow | ≈15 lb/ft³ | ≈15 lb/ft² |
| Wet or packed snow | ≈21 lb/ft³ | ≈21 lb/ft² |
| Ice | ≈57 lb/ft³ | ≈57 lb/ft² |
Why it matters for a claim
Snow-load and ice-dam claims often turn on what happened and when: sagging rafters, cracked ceilings, doors that stop closing, water stains under the eaves. Photos and depth measurements taken during the event help show the weight was there.
Related reading
See our page on ice dam and roof snow claims for how these losses are scoped and valued.
About this tool
What benchmark should I use?
Your town’s building official can tell you the design snow load used locally. New Hampshire figures vary a lot with town and elevation.
Does this tell me if my roof will fail?
No. Roof capacity depends on framing, condition and drifting. Use the result only as a rough, illustrative weight estimate.
